Hot melt roofing is undoubtedly one of the best ways to fix roof leaks or cracks. It also provides a seamless finish that leaves no mark and makes you roof good as new. Hot melt is a membrane that is applied directly to a prepared structural deck as a hot liquid to form an entirely seamless, monolithic layer. When properly protected, it is suitable for use as the waterproofing layer in most newly built flat roofing applications.
So, what is hot melt roofing, and when do you need it? Let’s discuss the topic in great detail down below.
When You Need Hot Melt Roofing
The most common use of hot melt is as an inverted roof system, in which the membrane is laid directly on the deck and insulation is laid on top, weighed down by ballast materials such as 20-gravel or paving slabs. Hot melt can also be used to waterproof green roofs, podium decks, and substructures.
Hot melt roofing is a method that uses hot liquid on a pre-prepared surface to seal any crack or leakage. Let’s go over a few scenarios that you can use hot melt roofing to fix your issues.
Waterproof a Concrete Deck
If you want to make a concrete deck waterproof, hot melt roofing is a perfect solution for you. You won’t have to drill or do anything fancy. It’s going to be a super-fast process as well.
When it comes to waterproofing a concrete deck, hot melt is the easiest and quickest solution, as there is no need to drill into the deck, it cures quickly, and there is no need for a separate vapor membrane. It is frequently used in projects ranging from small residential terraces to large inverted roofs of commercial offices and modern shopping malls. Hot melt is also ideal for waterproofing a podium deck, such as those found in shopping malls, parking garages, and train stations.
Whether you live in a small house or a big place, the roof melt method is the best one to go with. It’s going to help you make the concrete deck waterproof in no time. It’s fast, easy, and doesn’t take that much money.
It’s undoubtedly the best way to waterproof the drainage system by using the hot melt roofing method. Also, you know that the drainage system is so vital for a good design. Most of the designers out there design the roofs with flat tops that have almost no space for the falls.
So if you are looking for a great way of making the drainage system way better, you can try the hot melt roofing technique. It’s going to help you so much.
As you know, most of the professional roofing services provide the hot melt roofing services. So, if you want to improve the drainage system using the hot melt roofing, you should consult with them. They are likely to have a great option for you that you might like.
Designing a Long-Lasting Flat Roof
The membrane in an inverted roof is covered and thus protected from the elements, foot traffic, and mechanical damage for the duration of its life. The membrane is also fully adhered to the deck with hot melt, so that if it is damaged, water cannot migrate between the membrane and the roof structure, and repairs are relatively simple. If a leak does occur, a hot melt system is much easier and less expensive to locate and repair than a membrane system.
So, that way, everything you need to know on hot melt roofing and when you need it. Make sure that you hire a good service provider that is an expert in this field. You can search online or go with the best local service providers as well. Just do some research and see if their quality of work is good or not.